Network Firewall Solution

Sep 18, 2019

IEI monthly news
Network firewall solution
 
Network appliance for implementation of an open source software firewall

The old firewall at the police station, based on proprietary software and hardware, was ready for an upgrade. With the ever-increasing volume of data traffic, they needed a solution that would see them through the next few years and allow for expansion and upgrades in the future. There’s a lot of attention on uCPE and its provision of high flexibility on commercial off-theshelf hardware with a generic operating system and open source software. They were looking to leverage this technology to lower both their overall capital expenditure and operating expenses, but perhaps even more importantly were interested in the flexibility of managing the related VNFs with readily available open source software.

IEI’s PUZZLE range of networking appliances offers a comprehensive assortment of options for differing applications. For our client's specific requirements we recommended the PUZZLE-IN002. With its simple design and more budget conscious feature set, the PUZZLE-IN002 strikes a more conservative balance of power to cost.

All-in-one network computer

Our client's system needed to use the Ubuntu operating system. An issue that sometimes arises is when hardware requires specific drivers that may be proprietary or even unavailable. The PUZZLE series, being designed explicitly for running software-based VNFs within a vCPE model, naturally support the open source software that powers these systems, specifically the LINUX operating system on which Ubuntu is based, and the firewall software that runs on it. Unforeseen dependencies can complicate the installation of the operating system, but the PUZZLE-IN002 has been explicitly tested and supports Ubuntu right out the box.

Provisioning of the new equipment could have been difficult and complicated if proprietary hardware had been implemented on the PUZZLE-IN002, but with the choice of readily available hardware, and pretesting for compatibility, the client's installation of Ubuntu worked flawlessly from the start. With the Ubuntu operating system running smoothly and all hardware dependencies taken care of, our client successfully installed all their required virtualization packages and quickly integrated the PUZZLE-IN002 into the VNF infrastructure.

PUZZLE network appliance brochure

More Information about PUZZLE Series

- Download full case study

- Download brochure

PUZZLE Series Network Appliance

X86-based

PUZZLE-A001 network appliance

PUZZLE-A001 New!

  • 1U Rackmount Network Appliance with AMD EPYC™ Embedded 3000 series processor, 1 NMS & 2 PCIe x4 slots

- Specifications - Product News

PUZZLE-A002 network appliance

PUZZLE-A002

  • 1U Rackmount Network Appliance with AMD R-Series RX-421ND processor, Support 6 x GbE RJ45

- Specifications - Product News

PUZZLE-IN001 network appliance

PUZZLE-IN001

  • 1U Rackmount Network Appliance with Intel® Xeon® E, 8th Generation Intel® Core™/Pentium®/Celeron® Processor, up to 2 NMS and 2 PCIe slots

- Specifications - Product News

PUZZLE-IN002 network appliance

PUZZLE-IN002

  • 1U Rackmount Network Appliance with 8th Generation IntelCore. i7/i5/i3, Pentiumor CeleronProcessor, 1 PCIe slots.

- Specifications - Product News


ARM-based

PUZZLE-M801 network appliance

PUZZLE-M801

  • 1U Rackmount Network Appliance with Marvell® Armada® 8040 ARM v8 A72 quad-core System-on-Chip

- Specifications - Product News


Smart NICs -

Pulm-1G8T-BCM5720 NIC

PulM-1G8T-BCM5720 New!

  • Broadcom BCM5720 based Network Interface Card with 8 x RJ-45 by 4 PCIe 2.0 x 2 Interface

- Specifications - Product News

PulM-10G4SF-MLX_NIC

PulM-10G4SF-MLX New!

  • Mellanox ConnectX-4 Lx based Network Interface Card support Quad 10GbE with 4 x SFP+ by 2 PCIe 3.0 x 4 Interface

- Specifications - Product News

PulM-10G4SF-XL710 NIC

PulM-10G4SF-XL710 New!

  • Intel® Ethernet Controller XL710-BM1 based Network Interface Card with 4 x SFP+ by 1 PCIe 3.0 x8 interface

- Specifications - Product News

PulM-10G4T-AQC107 NIC

PulM-10G4T-AQC107 New!

  • Aquantia AQC107 based Network Interface Card with 4 x 10GBASE-T by 4 PCIe 3.0 x2 Interface

- Specifications - Product News

PulM-25G2SF-MLX NIC

PulM-25G2SF-MLX New!

  • Mellanox ConnectX-4 Lx based Network Interface Card support Dual 25GbE with 2 x SFP28 and PCIe 3.0 x8 Interface

- Specifications - Product News

New Products

Mustang-V100-MX4 | VPU Accelerator

Mustang-V100-MX4 | VPU Accelerator

  • Computing Accelerator Card with 4 x Intel® Movidius™ Myriad™ X MA2485 VPU, PCIe Gen 2 x 2 interface, RoHS

- Specifications - Product News

Mustang-M2BM-MX2 | VPU Accelerator

Mustang-M2BM-MX2 | VPU Accelerator

  • Deep learning inference accelerating M.2 BM key card with 2 x Intel® Movidius™ Myriad™ X MA2485 VPU, M.2 interface 22 mm x 80 mm, RoHS

- Specifications - Product News

News

Press Release

- Hottest Cloud Based Products Certified by Amazon & Microsoft

Case Study

- AOI Machine Controller

- Medical Cart Computer

Resource

 
catalog White Paper Case Study newsroom
Product Notice : PCN/EOL/TN/PDD